Product Description CHROME PLATED ELBOW 3/8"on

Straight male fitting 3/4" 20mm Italy

Straight male fitting 1/2" 16mm Italy

Product Description NIPPEL MALE CHROME 3/4"

Chrome C.P Extension Nipple Size : 1/2″ x 15MM

CHROME TEE 3/8 FEMALE 54X28MM

Product Description Elbow chrome ITALY 1/2"

The 3/4-in SharkBite push-to-connect elbow allows you to make a 90° connection to any combination of 3/4-in copper, CPVC or PEX pipe. SharkBite fittings are the easiest way to join pipe and do not require soldering, clamps, unions, glue or tools to complete the job. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.Lead free DZR brass construction for durability and reliability

All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure,Separation Strength TestVacuum TestThermal Cycle TestPressure Cycle TestTensile Corrosion Resistance TestCoating Thickness Determination Test (It is applied to the material other than standard tests.)Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C.Attachments must be installed by a qualified plumber.Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation.Attachments should be used with original fittings.Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings.During assembly, the attachment must be tightened with a suitable key from the key mouth parts.Abrasive materials should not be used for attachment cleaning.The installation must be protected against the risk of frost.It should be protected against external impacts during storage, transportation, assembly and use.

20cm X 20 cm DIN PVC Pipe Fitting Drainage System Floor Drain Cover

Factory set 12R dies create a standard NPT seal that is perfect for use in mechanical and low-pressure applications Ideal for use with the RIDGID line of power drive high-speed pipe threaders

Product Description Male Tap Reducer 1/2" x 3/4" BSP Bath Shower Pipe Reduction Dog Legs Eccentric

Product Description BRASS MALE ADAPTER 1/2"-1/2"

Extensible hose 1.5*40CL/CLICK

Description: McAlpine 1½" Centre Pin Bath Waste: 70mm Stainless Steel Flange: Plug Size: 1½" Flange Style: Stainless Steel Flange Size: 70mm Standard: EN 274-1:2002 Additional Info: The Centre Pin Dry Fixing Connection has the advantage of a quick, simple and neat installation and affords a saving in material and labour costs

MADE IN ITALY CHROME PUSH HAND SHOWER WITHOUT HOSE

MADE IN SPAIN

Grade "T" Nitrile (Color code: Orange stripe) Temperature range: -20° to 180° F DO NOT use with HOT WATER above 150° F Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range Also good for water services under 150° F The Model 7705 Standard Flexible Coupling is a standard flexible coupling for use in a variety of general piping applications of moderate pressure services. The model 7705 couplings features flexibility that can deal with misalignment, distortion, thermal stress, vibration and noise and also resist seismic tremors. With the use of Model 7705 couplings you can even design a curved layout. See Typical Applications Flexible Couplings on Shurjoint cut sheet #B-19. All Model 7705 couplings are comprised of two identical ductile iron housings segments, EPDM rubber gasket and plated track bolts & nuts. Housings segments are supplied with our standard painted finishes, i.e. orange or RAL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available. 7705couplings should always be installed so that the coupling bolt pads make metal to metal contact. Grade “T” Nitrile (Color code: Orange stripe). Temperature range: -20° to 180° F. DO NOT use with HOT WATER above 150° F. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Also good for water services under 150° F.