Designed Specifically for 4-Cylinder High-Performance Turbo-Charged Engines Oxygen Sensor Safe; Non-Corrosive Super High-Temp: Effective Up to 700°F (371°C) Great for Exhaust Manifolds Neutral Cure, Low Odor Part No. Size Pcs/Case Color 418-AB 3 OZ/85g 12/CASE Copper

Resists Temperatures Up to 650°F (343°C)Ideally Suited for Intake and Exhaust Manifolds,Headers, Thermostat Housings, etcLeak-Proof; Will Not Foul Oxygen Sensors Part No. Size Pcs/Case 11-AB 3 OZ./85g 12/CASE 11-AB-42* 1.5 OZ./42.5g 12/CASE

Product Description Two component rapid adhesive. Activator increases bonding strength by preventing the adhesive to be absorbed by the surface. It accelerates bonding. It is used for gluing wooden profiles, MDF, rubber, chip wood, plastic and rubber, repairing and fixing of wooden parts.

Product Description Application: rangeOther Chromate: freetrue Function:Glue Lead: freetrue Volume:500 ml

Product Description Suitable for expanded polysterene,Styropor also in combination with other materialswood, paper, metal, ceramic, plaster, fabric and various plastics.

Product Description Gorilla, 6 piece, 24 count, 1", clear mounting tape squares, tough & clear double sided, mounts in an instant for a permanent, weatherproof, bond, won't yellow over time & hold up to 7 lb, perfect for indoor & outdoor projects, stick to smooth & rough surfaces, completing diy projects is easy with these pre-cut, double sided squares, mount, build & repair. DOUBLE-SIDED TAPE CRYSTAL CLEAR ADHESIVE 24 PRE-CUT 1 INCH SQUARES 7 LB. STRONG HOLD INSTANT HOLD, PERMANENT BOND BONDS- Plastic, Metal, Wood, Glass, Brick, Ceramic, Stone, Drywall & More!

Product Description Gorilla Fabric Glue is a 100% waterproof, no sew solution for hems, embellishments, trim and more! Formulated to bond fabric, and hard-to-hold embellishments, Gorilla® Fabric Glue provides a fast setting, permanent bond that remains flexible after washing. This high strength adhesive dries crystal clear and can be used on a variety of surfaces, making it the perfect alternative to a traditional needle and thread. BONDS: Cotton, Denim, Polyester, Felt, Beads, Sequins, Ribbon and more! Crystal Clear Washer/Dryer Safe *Holds in seconds Permanent Bond Flexible

Product Description ABRO super-glue 3g has a very wide scope of application and is intended for gluing wood, metal, glass, rubber, natural leather, decorative and layered plastic, porcelain and other materials.Not suitable for gluing polyethylene and polypropylene. Glues in seconds. The coupling is resistant to impacts, high and low temperatures, many chemicals.Parameters: 3g

Product Description • Pre-Measured Dual Syringe for Consistent Results • Sets Up Crystal Clear in 5 Minutes • Repairs a Variety of Household Materials 25ml    

Product Description PU MAX®FLACON 75 GLiquid, waterproof (EN 204 D4) wood construction adhesive based on polyurethanePROPERTIESLiquid(Sea)waterproof (EN 204 D4)Super-strongLimited filling; slightly effervescingSolvent-freeTemperature and all-weather resistantCan be used internally and externallyPaintableSandableSUITABLE FOR:For water-resistant (EN 204 D4) mutual (surface) joining of practically all types of wood as well as joing practically all types of wood to many building materials, such as gypsum, (natural) stone, (cellular) concrete, metal, hard foam and various synthetics. Especially for bonding and repairing wood constructions and wood connections that have to meet stringent requirements. Suitable for finger joints, dovetail joints, mortise and tenon joints, dowels, springs, and more. Suitable for interior and exterior applications, such as façade carpentry and sandwich panels. Also for less-fitting joints (for example, unplaned wood). D4: Interiors where flowing water or condensation are present over long periods on a regular basis. Exteriors exposed to the influences of the weather, providing effective protection for bonded wood.

Product Description Ideal for fast, strong and invisible repairing of pottery, porcelain, glass, leather, wood, stone, metal and ceramics to themselves or to each other. Ideal for filling cracks thanks to filling capacity.   ·         Fast ·         Crystal clear ·         Super strong ·         Universal ·         Suitable for numerous materials ·         Temperature resistant from -40°C to +70°C ·         Gap-filling ·         Waterproof ·         Chemicals resistant ·         Paintable

Product Description 2 x 6305453 Bison Silicone High Temp 60ml re-sealable tube. Bison High Temp is a heat resistant silicone sealant suitable for bonding and sealing joints which are exposed to high temperatures. Heat resistant up to max 300°C (250°C after complete cure & up to 300°C temporarily for a maximum of 1 hour). Excellent for sealing and bonding ovens and microwave windows, heat exhaust systems such as liquid gasket in automotive applications. Sealant may expand in contact with grease, oil, coolant or fuels. Dries red. Water, chemical and UV resistant. Dries to form a permanent elastic bond. Adheres to glass, ceramics, metals, glazed tiles, plastic and many other materials. Great for joints and connections around ovens, microwaves, stoves, ceramic cooking rings, heat shields for fire places & flues.

Product Description Bison poly max high tack express transparent is a universal, crystal clear mounting adhesive and sealant, with high initial tack and rapid final strength build-up. Glue Including glass, stone, natural stone, concrete, plaster, many plastics, wood, chipboard, Trespa ® , iron, aluminium, zinc, steel, stainless steel and other metals, ceramic tiles, cork and mirrors To assemble This includes skirting boards, laths, slats, window sills, thresholds, fascias, sheet material, insulation material, plasterboard, polystyrene ornaments and decorative frames. sealing This includes skirting boards, (plastic) frames, steps, window sills, thresholds and plasterboard. Also suitable for sealing cracks in walls and ceilings. Not suitable for PE, PP, PTFE and bitumen. When gluing plastic, always carry out an adhesion test first. The adhesion to plastic can vary depending on the type of plastic and the quality of the plastic. Characteristics Crystal clear High initial tack Super fast final strength build-up Very high final strength Permanently elastic Applicable indoors and outdoors Can be painted over (test beforehand) Good filling power Temperature resistant from -40°C to +100°C Water and weather resistant 100% glue (shrink-free) Also adheres to slightly damp surfaces Solvent-free Excellent adhesion without primer Acid-free, odorless

Product Description Bison Poly Max Express is a universal mounting adhesive and sealant with a fast final build-up. Montagekit polymax is also suitable for sealing cracks in walls and ceilings. The Best Assembly Kit Bison polymax kit is suitable for bonding, mounting and sealing different surfaces. Bonding: glass, stone, natural stone, concrete, plaster, many plastics, wood, chipboard, Trespa, iron, aluminium, zinc, steel, mirrors, stainless steel, etc. Installation: carpentry, slats, baseboards, window sills, thresholds, fascias, panels, plasterboard, moldings, etc. Sealing : window frames, stair treads, window sills, thresholds and plasterboard How to use Bison Polymax glue? Only process at temperatures between +5°C and +40°C The surface must be clean, dust free and dry for maximum adhesion. Gluing and mounting: Apply the glue in strips or dots (every 10-40 cm) and always at the corners and along the edges of the material. Apply the material to the right place within 10 minutes and press firmly or tap lightly with a rubber hammer. If necessary, clamp or fasten heavy materials for 4 hours. Hand-tightened after 2 hours, the joint is now strong enough for transport or a light load. Maximum final strength after approx. 4 hours, depending on substrate (at least 1 porous material) and ambient conditions. Sealing: Apply the sealant evenly to the bottom of the joint and smooth within 10 minutes with a damp putty knife (soapy water without lemon), a sealant spreader or your finger. Smooth vertical joints from bottom to top. Hardening is complete after a few days (depending on the thickness of the layer). When repainting with alkyd paints, the paint may dry more slowly. Use white spirit to remove wet glue residue. Features of Bison Polymax Express Super fast increase in end strength Very high final resistance Permanent elasticity Applicable indoors and outdoors Can be painted (to be tested beforehand) Good filling capacity Resistant to temperatures from -40°C to +100°C UV, water and weather resistant 100% adhesive (non-shrinkable) Adheres to slightly damp substrates Solvent free Excellent adhesion without primer Acid-free, odorless

Description RENOLIT MP is an amber coloured, buttery smooth lithium grease suitable for a wide range of uses. RENOLIT MP has very good mechanical stability and excellent oxidation stability, ensuring long life. It is specially inhibited against rust and corrosion and has superior resistance to the washing-out action of water. RENOLIT MP maintains good pumpability, even in cold weather, and is ideal for centralised grease systems.   Application RENOLIT MP is suitable for bearing temperatures up to 120°C and is able to resist water contamination. The excellent oxidation resistance, as indicated by a low drop in pressure after 100 hours at 99°C and under 110psi of oxygen, indicates longer life in bearings with much less deterioration than greases of lesser quality.

Details Saratoga Gas Leak Detector is the indispensable product for leak testing of systems and connection of LPG and methane cylinders in the home, car, camping, boating, for the control of tanks and compressed air systems. Rivelature Fughe Gas also finds application on medical, cryogenic and industrial gas lines: acetylene, hydrogen, argon, nitrous oxide, ammonia and propane.

It is suitable to paint water-based or oily based paints that require solvent

Product Description Our STRONGEST construction adhesive, Max Strength Clear combines the strength and versatility you have come to expect from Gorilla with a crystal clear, easy to use, non-foaming formula.

Product Description Tackle your next DIY project by using this Gorilla 6346502 Heavy Duty Super Strength Clear Spray Adhesive. It's designed to be used for various applications. This Gorilla heavy duty adhesive can be re-positioned for up to 10 minutes. When it dries it will form a clear, permanent bond that is photo safe. It comes in a 4 ounce bottle that makes dispensing it on the right areas easy. This formula will make a useful addition to your crafting tools. Gorilla 6346502 Heavy Duty Super Strength Spray Adhesive, Clear, 4 oz: Container size: 4 oz Color: clear Flammable UV resistant Solvent resistant Indoor or outdoor Product form: liquid Working time: 5 minutes Full cure time: 24 hour Adhesion strength: super strength Recommended surface: fabric, paper, wood, plastic, cardboard, foam, metal and more Aerosol can Gorilla spray adhesive

Gorilla takes epoxy to the Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, clear finish that makes projects look spotless.

Product Description Gorilla Heavy Duty Construction Adhesive is a tough, versatile, all-weather adhesive. Unlike other construction adhesives, its 100% adhesive formula provides a long-lasting, heavy duty bond. We call it All Surface, All Purpose. The gap-filling, durable, 100% waterproof formula is perfect for indoor and outdoor projects, holds in 30 seconds, and bonds virtually anything including subfloor, mirrors, trim, drywall, landscaping, bath surrounds, foamboard, marble and more!  

The strength and versatility you have come to expect from Gorilla Glue is now available in an easy to use, crystal clear, non-foaming formula. Clear Gorilla Glue is incredibly strong and is ideal for indoor and outdoor applications and bonds virtually everything. Easy to use, crystal clear, non-foaming formula Clear Gorilla Glue(TM) is incredibly strong Ideal for indoor and outdoor applications Easy to use Versatile: bonds wood, stone, metal, ceramic, foam, glass and more 51 ml

Easy-to-use, thicker and more controlled formula. Great for multiple surfaces and vertical applications. Specially formulated to absorb drops, impacts and shocks. Bonds plastic, wood, metal, ceramic, rubber, leather, paper and more. Not recommended for use on polyethylene or polypropylene plastic. Includes anti-clog cap with metal pin inside to ensure an airtight seal for maximum reusability. 10-30 second clamp time with full cure in 24 hours. Dries translucent.

Product Information Quickly Strips Paint, Varnish and Epoxy Penetrates and Softens in One Application Lifts and Removes Graffiti, Decals and Other Markings Part No. Size Pcs/Case PR-600 10 OZ/283g 12/CASE

This spray is based on pure silicone oil that has anti-stick release agents. It lubricates and gives a good water repellency on treated materials preventing the accumulation of electrostatic charges. It works as a polishing and protective spray on plastic parts. It also protects seals from cracking, increasing tightness and durability.