Descripti

Read more less

Gorilla spray is a flexible, rubber-based coating that repels water, air, and moisture. The spray head (nozzle) features a precise spray pattern that provides a clean, even coat. Once sprayed, the "self-leveling" formula smoothly covers small gaps and cracks to ensure a complete seal and prevent water leakage. When dry, the spray becomes paintable and resistant to temperature and UV rays, resulting in long-lasting repairs! Excellent for use in homes, cars, boats, camping, RVs, outdoor spaces, and much more. Technical specifications Application temperature (during use): approximately 10°C to 32°C. Service temperature (after drying): Withstands from -40°C up to 71°C. Indoor/outdoor use: Yes, suitable for both. UV/Sun resistance: Yes. Paintable: Yes (you can spray it with another color). Flammable: Yes (Care should be taken while spraying and stay away from sources of fire). Color after drying: Black. Solvent resistance: No (not affected by solvent chemicals).

Read more less

Bison Poly Max Crystal Express is a high-quality, one-component adhesive and sealant that is designed for use in a wide range of applications. It comes in a 300g tube and is clear in color. This adhesive and sealant is suitable for bonding and sealing a variety of surfaces, including wood, metal, stone, concrete, and plastic. It has a fast cure time and high initial strength, making it ideal for use in applications where a quick bond is required. Bison Poly Max Crystal Express is also resistant to water, weather, and UV radiation, making it ideal for both indoor and outdoor use. It can be used for a variety of applications, including bonding and sealing windows, doors, and gutters, as well as for general construction and DIY projects. In addition, Bison Poly Max Crystal Express adhesive and sealant have good flexibility, which allows it to expand and contract with changes in temperature and humidity without cracking or shrinking. It is also paintable, which means it can be painted over once it has cured. Features  Super-fast building of final bonding strength Permanently elastic Can be used internally and externally Paintable (test first) Good filling capacity 100 % adhesive (non-shrinking) Solvent-free Excellent bonding without primer Acid-free, odorless Resistant to temperatures between -40 °C and +100 °C, Water and all-weatherproof, also bonds to slightly damp surfaces Caution It is important to note that adhesive and sealant should be used in a well-ventilated area, and appropriate safety gear, such as gloves and eye protection, should be worn when applying Bison Poly Max Crystal Express glue. It is also recommended to read the manufacturer's instructions carefully before use.

Read more less

Bison Polymax High Tack Express Bison Poly Max High Tack Express is a universal assembly adhesive and sealant with high initial adhesion and a fast final strength build-up. Montagekit polymax is also suitable for sealing cracks in walls and ceilings. The best assembly sealant Bison sealant polymax is suitable for gluing, mounting, and sealing different surfaces. Bonding: glass, stone, natural stone, concrete, plaster, many plastics, wood, chipboard, Trespa, iron, aluminum, zinc, steel, mirrors, stainless steel, etc. Fitting: wainscoting, battens, skirting boards, window sills, thresholds, fascias, sheet metal, drywall, moldings, etc. Sealing: window frames, stair treads, window sills, thresholds and drywall How do I use Bison Polymax adhesive? Use only at temperatures between +5°C and +40°C The surface must be clean, dust-free, and dry for maximum adhesion. Glue and mount: Apply sealant in stripes or dots (every 10-40 cm) plus always at corner points and along edges of sheet material. Position the material within 10 minutes and press firmly or tap lightly with a rubber mallet. If necessary, clamp or fix heavy materials for 4 hours. Hand-tight after 30 minutes, the joint is now sufficiently strong for transport or light loading. Maximum final strength after approx. 4 hours, depending on substrate (at least 1 porous material) and ambient conditions. Sealing: Apply sealant evenly to the bottom of the joint and smooth within 10 minutes with a moist (soapy water without lemon) putty knife, sealant spreader or finger. Smooth vertical joints from bottom to top. Complete curing after a few days (depending on layer thickness). When repainting with alkyd paints, the paint may dry more slowly. Use white spirit to remove wet glue residues. Features Bison Polymax High Tack Express Very high initial tack Super fast end-strength build-up The very high final strength Permanently elastic Indoor and outdoor use Paintable (test beforehand) Good filling capacity Temperature resistant from -40°C to +100°C UV, water and weather-resistant 100% adhesive (non-shrink) Adheres to slightly damp substrates Solvent-free Excellent adhesion without primer Acid-free, odorless

Read more less

Product Description Ideal for repairs to metals, pottery, porcelain, crystal, glass, ivory, pearls, precious stones and numerous synthetics (such as polyester, bakelite, Formica, rigid polystyrene and acrylic glass.

Read more less

Product Description Bison Glass 2 ml glue is a high-quality glass glue that can also be used in combination with metals. Very strong special transparent glue curing by UV radiation in daylight for bonding glass and crystal. After hardening, it has high resistance to UV radiation and temperatures from -50°C to 130°C. It is also resistant to oils, dilute acids and alkalis. The glued joint remains elastic and balances the internal stress. The glue is suitable for bonding glass - glass and glass - metal combinations. It is not suitable for gluing safety glass.Manual:• The glued parts must be clean, dry and degreased.• Apply the glue to one surface of the glued material.• Immediately press together and fix.• Let the sunlight work until the glue hardens (10 - 20 seconds).The speed of curing depends on the intensity of daylight. In the dark and under artificial lighting, the glue does not harden at all. The glued joint reaches handling strength after 5 minutes and functional strength after 10 minutes, depending on the intensity of sunlight. Remove unhardened glue with acetone, hardened glue only mechanically. Store in a dry, cool place and protect from the effects of daylight. Do not use at temperatures below +10°C. Stick the glued object on a table near a closed window, open the window for hardening and let UV radiation work. The more sunlight, the faster the reaction.

Read more less

Product Description ABRO Grey RTV Silicone Gasket Maker 999 is a neutral cure/low odour product designed for high temperature applications. Safe for use with Oxygen sensors when fully cured, is non corrosive and is heat resistant up to 343°C.  

Read more less

Product Description ABRO_ES-507_57G EPOXY STEEL

Read more less