إصلاح الإطارات

8 products


  • MEGA TIRE INFLATOR GUN MG16386

    Mega Hand Tools MEGA TIRE INFLATOR GUN MG16386

    5 in stock

    About this item Easy to use when connected to your air compressor, the MG16386 combines 3 tools in one compact design—an inflation gun, chuck and gauge The flexible hose helps you maneuver easily into heel wells and other tight spaces Easy to control with a large, readable gauge—2” in diameter—that measures between 10 - 150 PSI. The inflation gun features a side relief valve for bleeding off air and reducing pressure in over-inflated tires, helping you achieve proper inflation Simply squeeze the clip and position the chuck over any Schrader-type tire valve; Release the clip to lock the hands-free chuck into place. Squeeze the trigger on the inflation gun to inflate Finish your projects faster and easier with Campbell Hausfeld. The Air Power Expert

    5 in stock

    10.900 JOD

  • Repair by sawing

    Mega Hardware L Repair by sawing

    Complete repair kit with everything you need to fix a puncture yourself. Suitable only for tubeless tires. The kit contains the following parts: - Tool / mounting needle with T-handle - 5 pieces. Sealing plugs (length 10 cm) - Adhesive Just follow these 5 simple steps. 1. Remove any objects . 2. Re-grate the hole so that the edges are even and the hole is large enough. 3. Cover the sealing plug with the supplied glue. 4. Then insert the sealing plug with the mounting needle (a few cm should protrude out of the hole) 5. Cut or cut off the sealing plug, leaving 2-3 mm. Then seal with a little glue around the hole and allow it to harden for a while before pumping up the tire.

    2.500 JOD

  • ABRO 340G TIRE INFLATOR

    ABRO ABRO 340G TIRE INFLATOR

    7 in stock

    Product Information Inflates Most Flat Tires Within One Minute Conveniently Sized With Easy-to-Use Hose Applicator Eliminates the Need for Tools and Tire Changing Part No. Size Pcs/Case QF-25 12 OZ/340g 12/CASE QF-35 15 OZ/425g 12/CASE

    7 in stock

    3.100 JOD

  • GLADIATOR_ 450ML TIRE SEALANT & INFLATOR

    Gladiator GLADIATOR_ 450ML TIRE SEALANT & INFLATOR

    Out of stock

    Emergency tire sealant & inflator  is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tires of cars, motorcycles, electrical bicycles. No jack nor tire-change is needed. One step procedure of tires pumping and repairing is finished in seconds. It can also be filled into new tires to prevent unexpected leakage. Non-toxic and odorless. No corrosion and no damage to the tire. USAGE DIRECTION: 1. If possible remove object causing puncture. 2. Shake the can well before use. 3. Screw connecting tube firmly onto tires valve. 4. Hold the can upright-button uppermost-remove protector cap-press button until tires appears firm. 5. After pumping is finished, disconnect both ends of the tube. Immediately drive 3-5 km to allow the sealer to spread in tires and mend the puncture. Then check and adjust tires pressure.

    Out of stock

    2.200 JOD

  • AMBRO_ 300ML TIRE INFLATE & REPAIR

    AMBRO SOL AMBRO_ 300ML TIRE INFLATE & REPAIR

    Out of stock

    It immediately pumps up and repairs every type of flat tire (with or without inner tube). It provides an effective and permanent solution by creating a complete, uniform seal layer inside the tire. This product has been fully tested to certify its effectiveness and excellence. After the repair, it is advised to ask a tire expert to check the tire pressure.

    Out of stock

    4.150 JOD

  • EAGLE TIRE PLUGS 5PCS

    Mega Hardware L EAGLE TIRE PLUGS 5PCS

    9 in stock

    Product Description  TIRE REPAIR STRIP

    9 in stock

    2.200 JOD

  • TIRE PRESSURE GAUGE WITH INFLATOR (170 PSI)

    Mega Hardware L TIRE PRESSURE GAUGE WITH INFLATOR (170 PSI)

    3 in stock

    Brand TIRETEK Material Rubber,Steel,Brass Item Dimensions LxWxH 11.4 x 5.5 x 3.2 inches Item Weight 1.28 Pounds About this item WANT CORRECTLY INFLATED TIRES? - This is a robust, steel & brass in construction, mechanical automotive tool, that is calibrated to conform to the ANSI B40.1 Grade B (±2%) international accuracy standard. So you get precise, accurate inflation every time you use it. SECURE LOCK-ON CHUCK DESIGN - Gives you a great seal on the tire valve whilst freeing up your hands to operate the pump. Plus a built in air bleeder valve enables easy tire gauge deflation to the exact pressure required. RECOMMENDED BY MECHANICS – This tire inflator with pressure gauge comes with a flexible hose and a large, clear, easy to read display dial with a 0-170 psi gauges. Surrounded by a large rubber case for additional protection and durability. A TOP RATED INFLATION GUN AIR TOOLS – Making it the perfect air compressor accessories and tire inflator nozzle, ideal for your cars, motorcycles, trucks, semi truck, bike, SUV, RV, jeep or ATV tires and great garage accessories for men. Perfect stocking stuffers for men.

    3 in stock

    7.300 JOD

  • TIRE PRESSURE GAUGE - 100 PSI

    Mega Hardware L TIRE PRESSURE GAUGE - 100 PSI

    Out of stock

    About this item ✅ HIGH DURABILITY: Planet Linens High quality measurement precision machine offers high durability. Heavy Duty construction with a reinforced rubber hose and longer internal brass joints to prevent air leakage ✅ This gauge is built to last for years! Keep your family safe! under inflation is the most common cause of tire failure.

    Out of stock

    3.500 JOD

Login

Forgot your password?

Don't have an account yet?
Create account