لوازم السباكة
Mega Hardware L HEX NIPPLE 3/4" MALE
Malleable Cast iron fittings are distinguished from other types on the market, because of high mechanical stress and temperature resistance, due to the use of very high quality alloy cast iron (EN-GJMW-400-5 to EN 1562). Suitable for working pressures up to 25bar at 125 ° C Maximum test pressure: 1.5 x design pressure Threads according to EN10226-1; female tread to BSPP thread (cylindrical) and male thread to BSPT (conical). Fields of application: Plumbing, HVAC, sprinkler systems, air lines etc
0.350 JOD
Mega Hardware L HEX NIPPLE 1 INCH MALE
Malleable Cast iron fittings are distinguished from other types on the market, because of high mechanical stress and temperature resistance, due to the use of very high quality alloy cast iron (EN-GJMW-400-5 to EN 1562). Suitable for working pressures up to 25bar at 125 ° C Maximum test pressure: 1.5 x design pressure Threads according to EN10226-1; female tread to BSPP thread (cylindrical) and male thread to BSPT (conical). Fields of application: Plumbing, HVAC, sprinkler systems, air lines etc.
0.750 JOD
Mega Hardware L REDUCING COUPLING 1/2"X3/8"
This GRAINGER APPROVED reducing coupling is generally used in hospitals, schools, commercial bathroom installations, and other plumbing applications where yellow brass cannot be used.
1.300 JOD
Mega Hardware L DRAIN PLUG 32MM
This black lavabo plug is suitable for a drain with a diameter of 32mm. The accompanying chain has a length of 250mm.
0.650 JOD
Mega Hardware L 3/8"COPPER PLATED ELBOW
2.350 JOD
Mega Hardware L Italian chrome elbow 3/8 inch
Product Description CHROME PLATED ELBOW 3/8"on
1.900 JOD
Mega Hardware L STEEL CLAMP W/BRACKET + 2NUTS 1"-1/4
CSA steel clamp w/ bracket + 2 nuts 1"-1/4
0.950 JOD
Mega Hardware L 3/8 "BRASS AUTOMATIC AIR VALVE AUTOMATIC AIR VENTS FOR SOLAR WATER HEATER PRESSURE RELIEF VALVES
2.700 JOD
Mega Hardware L 3/8"BRASS AUTOMATIC AIR VALVE
3/8" brass automatic air valve automatic air vents for solar water heater pressure relief valves
3.700 JOD
Mega Hardware L 3/4"NIPPLE MALE COPPER
0.500 JOD
Mega Hardware L STRAIGHT MALE FITTING 3/4" 26MM
Straight male fitting 3/4" 20mm Italy
3.350 JOD
Mega Hardware L WATER OUTLET 1/2"
0.400 JOD
Mega Hardware L STRAIGHT MALE FITTING 1/2"16MM
Straight male fitting 1/2" 16mm Italy
1.350 JOD
Mega Hardware L Italian chrome nozzle, 3/4 inch
Product Description NIPPEL MALE CHROME 3/4"
0.900 JOD
Mega Hardware L Italian chrome nozzle 0.5 inch
Product Description NIPPEL MALE CHROME 1/2"
0.800 JOD
Mega Hardware L CHROME EXTENSION NIPPLE 1/2"X15MM
Chrome CP Extension Nipple Size: 1/2″ x 15MM
1.000 JOD
Jindal SOCKET CHROMIUM 1/2-3/8"
Reducing Socket Chromium 1/2-3/8
1.250 JOD
BSP 1/2"CHROME PLATED ELBOW
Chrome plated brass BSP threaded pipe fittings are being used to join pipes for water and heating systems. Angled 90 deg elbow fitting comes in 3/8, 1/2 or 3/4 Inch BSP thread size, male on one end and female on the other end. - Type: elbow; - Thread size: 3/8, 1/2 BSP Male x Female; - Material: chrome plated brass; -Max. Working temperature: +100C; -Max. Working pressure: 1.0MPa (10 bar).
1.500 JOD
Jindal INNER COPPER PLUG 1/2"
Italian inner copper plug 1/2"
0.500 JOD
Jindal STEEL DRAIN HOLE SINK FILTER
100% brand new and high quality. Stainless steel sink strainer fits most sink drains and garbage disposals, micro perforations the strainer efficiently prevents even the smallest food particles from going through. Perfect for home use, no worring about the gap on your sink. It can be applied in most standard sink
3.000 JOD
Jindal CHROME PIPE FITTING 1/2"
0.500 JOD
Jindal BRASS TEE 1/4 "
2.350 JOD
Mega Hardware L INNER COPPER PLUG 3/4"
1.250 JOD
Mega Hardware L 3/8" CHROME TEE
CHROME TEE 3/8 FEMALE 54X28MM
1.500 JOD
Mega Hardware L BALL VALVE WITH LEVER 3/8"
Product Description BALL VALVE WITH LEVER 3/8"
1.500 JOD
Mega Hardware L T WATER CONNECTORS 1/2"*16MM
T WATER CONNECTORS 1/2"*16MM
3.500 JOD
Mega Hardware L 3/4"NIPPEL MALE CHROME
1.000 JOD
Mega Hardware L Italian chrome elbow 0.5 inch
Product Description Elbow chrome ITALY 1/2"
1.650 JOD
PATTARONI MALE ELBOW1"*25*2.3MM
The 3/4-in SharkBite push-to-connect elbow allows you to make a 90° connection to any combination of 3/4-in copper, CPVC or PEX pipe. SharkBite fittings are the easiest way to join pipe and do not require soldering, clamps, unions, glue or tools to complete the job. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially shaped O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project. Lead free DZR brass construction for durability and reliability
6.500 JOD
BG GARDEN WATER CONNECTORS 1/2"
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure, Separation Strength Test Vacuum Test Thermal Cycle Test Pressure Cycle Test Tensile Corrosion Resistance Test Coating Thickness Determination Test (It is applied to the material other than standard tests.) Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C. Attachments must be installed by a qualified plumber. Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation. Attachments should be used with original fittings. Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings. During assembly, the attachment must be tightened with a suitable key from the key mouth parts. Abrasive materials should not be used for attachment cleaning. The installation must be protected against the risk of frost. It should be protected against external impacts during storage, transportation, assembly and use. All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile
2.250 JOD
BG شد وصل 1 انش
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure, Separation Strength Test Vacuum Test Thermal Cycle Test Pressure Cycle Test Tensile Corrosion Resistance Test Coating Thickness Determination Test (It is applied to the material other than standard tests.) Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C. Attachments must be installed by a qualified plumber. Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation. Attachments should be used with original fittings. Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings. During assembly, the attachment must be tightened with a suitable key from the key mouth parts. Abrasive materials should not be used for attachment cleaning. The installation must be protected against the risk of frost. It should be protected against external impacts during storage, transportation, assembly and use.
5.500 JOD
rock 20CM X 20 CM DRAINAGE SYSTEM FLOOR DRAIN COVER
20CM X 20 CM DRAINAGE SYSTEM FLOOR DRAIN COVER
1.650 JOD
Mega Hardware L STICK DRAIN CLEANING
This drain auger or drain snake will clear clogs from hair and build up in any drain Safe and effective to use in bathroom sinks, bath tubs, laundry tubs, and showers Flexible drain cleaning snake fits small strainers and pipes The Stick is reusable and cleans with water and mild soap. Clean after easy use Removes clogged dirt quickly and hair easily
1.250 JOD
Mega Hardware L RING ASSORTMENT METRIC
FAST AND FREE SHIPPING. SHIP SAME DAY. We process and ship most orders same day after receiving payment HIGH QUALITY BRAND. 407 PCS UNIVERSAL PER KIT MATERIAL BUNA-N PASSED ASTM OIL #1 & #3 LABORATORY TEST FOR PERSONAL AND PROFESSIONAL WORKSHOPS GARAGES, AND PLUMBING SERVICE ETC. PROFESSIONAL QUALITY
13.500 JOD
STAREX RATCHET DIE HEAD 3/4"
Factory set 12R dies create a standard NPT seal that is perfect for use in mechanical and low-pressure applications Ideal for use with the RIDGID line of power drive high-speed pipe threaders
4.000 JOD
Mega Hardware L FLOOR DRAIN WITH GRATING COVER
Our company holds specialization in exporting FLOOR DRAIN WITH GRATING COVER to our precious customers. These products are manufactured from the finest quality of raw material that is sourced from reliable suppliers of industry. This product is highly respected in the market due to strength, low maintenance, and low prices. With our wide distribution network, we transport these products within a given time period. FEATURES: Minimum maintenance Light in weight Matchless quality 4"*4" Floor Drain with Grating Cover
2.750 JOD