لوازم السباكة
BG شد وصل 1 انش
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure, Separation Strength Test Vacuum Test Thermal Cycle Test Pressure Cycle Test Tensile Corrosion Resistance Test Coating Thickness Determination Test (It is applied to the material other than standard tests.) Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C. Attachments must be installed by a qualified plumber. Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation. Attachments should be used with original fittings. Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings. During assembly, the attachment must be tightened with a suitable key from the key mouth parts. Abrasive materials should not be used for attachment cleaning. The installation must be protected against the risk of frost. It should be protected against external impacts during storage, transportation, assembly and use.
5.500 JOD
rock 20CM X 20 CM DRAINAGE SYSTEM FLOOR DRAIN COVER
20CM X 20 CM DRAINAGE SYSTEM FLOOR DRAIN COVER
1.650 JOD
STAREX RATCHET DIE HEAD 3/4"
Factory set 12R dies create a standard NPT seal that is perfect for use in mechanical and low-pressure applications Ideal for use with the RIDGID line of power drive high-speed pipe threaders
4.000 JOD
AKSA MALE TAP REDUCER 1/2"
Product Description Male Tap Reducer 1/2" x 3/4" BSP Bath Shower Pipe Reduction Dog Legs Eccentric
2.250 JOD
CHANAL BRASS MALE ADAPTER 1/2"-1/2"
Product Description BRASS MALE ADAPTER 1/2"-1/2"
0.650 JOD
MALPINE EXTENSIBLE HOSE 1.5*40C
Extensible hose 1.5*40CL/CLICK
1.750 JOD
4.500 JOD
McAlpine 1½" CENTER PIN BATH WASTE WITH PLUG
Description: McAlpine 1½" Center Pin Bath Waste: 70mm Stainless Steel Flange: Plug Size: 1½" Flange Style: Stainless Steel Flange Size: 70mm Standard: EN 274-1:2002 Additional Info: The Center Pin Dry Fixing Connection has the advantage of a quick, simple and neat installation and affords a saving in material and labor costs
1.350 JOD
Mega Hardware L PUSH HAND SHOWER WITHOUT HOSE
MADE IN ITALY CHROME PUSH HAND SHOWER WITHOUT HOSE
2.700 JOD
FIL-NOX 60CM PLUMBING HOSE
MADE IN SPAIN
1.600 JOD
SHURJOINT FLEXIBLE COUPLING,PAINTED,2"
Grade "T" Nitrile (Color code: Orange stripe) Temperature range: -20° to 180° F DO NOT use with HOT WATER above 150° F Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range Also good for water services under 150° F The Model 7705 Standard Flexible Coupling is a standard flexible coupling for use in a variety of general piping applications of moderate pressure services. The model 7705 couplings features flexibility that can deal with misalignment, distortion, thermal stress, vibration and noise and also resist seismic tremors. With the use of Model 7705 couplings you can even design a curved layout. See Typical Applications Flexible Couplings on Shurjoint cut sheet #B-19. All Model 7705 couplings are comprised of two identical ductile iron housings segments, EPDM rubber gasket and plated track bolts & nuts. Housings segments are supplied with our standard painted finishes, ie orange or RAL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available. 7705Couplings should always be installed so that the coupling bolt pads make metal to metal contact. Grade “T” Nitrile (Color code: Orange stripe). Temperature range: -20° to 180° F. DO NOT use with HOT WATER above 150° F. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Also good for water services under 150° F.
8.000 JOD
Mega Hardware L COOL SELF-CLOSING MONO FAUCET
Features WATER SAVING Water-saving for ecological and economical sense.
16.000 JOD
Mega Hardware L 3/4"WATER TANK OUTLET CONNECTOR
Specifications: Materials:brass Installation Type: thread mounting Nominal Pressure: atmospheric pressure Opening method: wrench type Type:DN15 Features: - Brass materials, durable and not easy to rust. - Threaded interface for easy installation. - Suitable for ibc tank.
5.500 JOD
Jindal TAP HOLE COVER 1.5" CHROME
TAP HOLE COVER 1.5" CHROME
4.500 JOD
Jindal TAP HOLE COVER 1/2" CHROME
The tap hole cover reliably closes open tap holes in sinks or bathtubs. It decorates openings that are not required and contributes to bathroom design. Its diameter is 0.5". It is attached by simply screwing it together. No lever function on the pool is required for this. The cover is made of robust brass with a chrome-plated surface.
0.800 JOD
KLOZET KAPAGI PLASTIC SCREWS FOR WC SEAT COVER
MADE IN TURKEY
0.750 JOD
You have seen 52 out of 52 products
