Hand Tools

1192 products


  • MEGA BRICKLAYING TROWEL MG7307

    MEGA BRICKLAYING TROWEL MG7307

    7 in stock

    MEGA BRICKLAYING TROWEL MG7307

    7 in stock

    1.700 JOD

  • MEGA ALUMINUM SPIRIT LEVEL, 24"-MG17131

    Mega Hand Tools MEGA ALUMINUM SPIRIT LEVEL, 24"-MG17131

    9 in stock

    Aluminum spirit level with precision ground contact surfaces: for an accuracy of 0.5 mm per meter. The light metal spirit level has 1 level each for horizontal and vertical measurement, it also features a measuring scale for length measurements. With the hanging hole, the aluminum spirit level can be conveniently stored or placed in a tool wall. At the ends of the spirit level are rubber bumpers, which protect the spirit level and your accuracy even from falls from a higher height.

    9 in stock

    5.000 JOD

  • MEGA AIR SPRAY GUN MG16602

    MEGA AIR SPRAY GUN MG16602

    15 in stock

    MEGA AIR SPRAY GUN MG16602

    15 in stock

    14.000 JOD

  • MEGA SOLDERING IRON MG9010

    MEGA SOLDERING IRON MG9010

    4 in stock

    Used for soldering the components on and off the PCB. It is composed of a heated metal tip and an insulated handle. Heating is achieved electrically, by passing an electric current (supplied through an electrical cord or battery cables) through a resistive heating element. Can be used for installation, repairs, and limited production work in electronics assembly.Features:· This soldering gun is suitable for leaded as well as assembly components.· High quality and low consumption.· Attains full operating temperature within seconds.· Very light and heat resistant handle.· Maintains constant tip temperature.· Low leakage current.· Safe to use on delicate components.· Maximum heat transfer efficiency.· Slide on tip replacement.· High quality and durable element.· Designed for long life.· ERTL certified.

    4 in stock

    3.750 JOD

  • MEGA SCRAPER HT_257609 "3

    Mega Hand Tools MEGA SCRAPER HT_257609 "3

    5 in stock

    MEGA SCRAPER HT_257609 "3

    5 in stock

    1.100 JOD

  • MEGA SCRAPER 50MM HT_257609

    Mega Hand Tools MEGA SCRAPER 50MM HT_257609

    8 in stock

    MEGA SCRAPER 50MM HT_257609

    8 in stock

    0.950 JOD

  • MAKITA SDS-PLUS TYPE BIT D-00561 160*10MM

    Makita MAKITA SDS-PLUS TYPE BIT D-00561 160*10MM

    2 in stock

    Makita SDS Plus Drill Bit 10mm X 160mm- D-00561- SDS plus drill bits suitable for masonry and concrete.- The solid carbide tip with centering point and optimised flutes offers fast drilling speeds in a contractors, low cost option.- Standard range.- Size: 10X160MM.- Brand : Makita.- Concrete drilling is the best.- Is the popular type SDS Phillips head bits.- Available in hammer drill SDS Plantype company power tool manufacturers.

    2 in stock

    1.350 JOD

  • MAKITA_B-42438_SHOCK DRIVER_PH2 X125

    Makita MAKITA_B-42438_SHOCK DRIVER_PH2 X125

    Out of stock

    MAKITA_B-42438_SHOCK DRIVER_PH2 X125

    Out of stock

    14.850 JOD

  • MAKITA SDS-PLUS TYPE BIT D-00131 8*160MM

    Makita MAKITA SDS-PLUS TYPE BIT D-00131 8*160MM

    5 in stock

    Makita D-00131/00527 SDS Plus Drill Bit is concrete shank drill bit is made from high quality materials for powerful and efficient operation. Has a dedicated design to help you operate quickly, conveniently and safely to use the SDS max drilling machine to help you use the fastest and safe way to use. Carbide inserts welded in wide and deep slits providing greater resistance and higher volume double spiral for dust removal and optimized offering drilling speed. It is suitable for masonry and concrete. Measures: 8 mm diameter by 160 mm overall length. More Information Brand Makita UPC/EAN 088381169127 Included Component 1 x Makita D-00131/00527 SDS-Plus Hammers Drill Bit, 8 mm Diameter x 160 mm Overall Length Model Number D-00131/00527 Model Name Drill Bits and Chisels

    5 in stock

    2.250 JOD

  • MAKITA A-84115 DIAMOND WHEEL 125MMX22.23

    Makita MAKITA A-84115 DIAMOND WHEEL 125MMX22.23

    Out of stock

    A general purpose economy diamond blade for use with marble & concrete. The Standard range of blades provide a wider range of cutting options & also retain the cost effectiveness for the end user. Applications: Concrete Besser Block Pavers Cement Roof Tile Marble Unglazed Tile Specifications Diameter: 125mm Bore: 22.23/30mm Thickness: 1.9mm Max RPM: 12,250

    Out of stock

    11.700 JOD

  • MAKITA_A-84137 DIAMOND WHEEL 230MMX22.23

    Makita MAKITA_A-84137 DIAMOND WHEEL 230MMX22.23

    Out of stock

    MAKITA_A-84137_DIAMOND WHEEL_230MMX22.23_اسطوانه قص

    Out of stock

    27.200 JOD

  • MAKITA 14" CUT OFF WHEEL

    Makita MAKITA 14" CUT OFF WHEEL

    Out of stock

    MAKITA_A-87672_14" CUT OFF WHEEL_فيبر قص حديد

    Out of stock

    2.700 JOD

  • MAKITA D-19021 SDS CHISEL 20MM WIDE 400MM LONG FOR DRILLS WITH ROTO-STOP

    Out of stock

    5.000 JOD

  • MAKITA B-57211 18'/5.5M TAPE MEASURE

    Makita MAKITA B-57211 18'/5.5M TAPE MEASURE

    Out of stock

    Features rubber overmold for improved operator grip and protection against damage Features SAE (inch) and/or metric (mm) measurements on both sides of tape for easy reading Magnetic tip attaches to ferrous metals for easy and accurate one-handed operation Tape coating provides increased durability and protection Matte finish on tape reduces glare, making it easy to read in bright environments

    Out of stock

    16.200 JOD

  • MAKITA B-57168 TAPE MEASURE, 10M

    Makita MAKITA B-57168 TAPE MEASURE, 10M

    Out of stock

    Four rivets protector, more robust than tapes with either two or three Hook protector, rubberised bumper to protect the hook end if the tape is dropped Tape can be extended unsupported up to 2.2 metres Neodymium magnet Shock absorbing, damper reduces shock impact on the hook when retracting the tape

    Out of stock

    24.000 JOD

  • MAGNUSSON BOX BEAM LEVEL 800MM RED

    Mega Hardware L MAGNUSSON BOX BEAM LEVEL 800MM RED

    Features: Tri-Chamber Anti-Shock Endcaps Milled Surface 3 Vials Carry Handle High Quality Powder Coated Finish High Accuracy Ergonomic Design Heavy Duty Lightweight & Durable Design ERS - Easy Read System Plus Made in china

    11.000 JOD

  • MAGNUSSON BOX BEAM LEVEL 400MM

    GTC MAGNUSSON BOX BEAM LEVEL 400MM

    Out of stock

    Anodised aluminum construction. Robust and highly accurate level with magnetic points in the base for use on metal surfaces and pipes. Features shock-resistant rubber end caps to help protect from impact and solid block vials for finding true horizonal and vertical angles. Ergonomic hand grip.

    Out of stock

    14.000 JOD

  • MAGNUSSON BOX BEAM LEVEL 100CM

    GTC MAGNUSSON BOX BEAM LEVEL 100CM

    Out of stock

    Anodised aluminum construction. Robust and highly accurate level with magnetic points in the base for use on metal surfaces and pipes. Features shock-resistant rubber end caps to help protect from impact and solid block vials for finding true horizonal and vertical angles. Ergonomic hand grip.

    Out of stock

    16.000 JOD

  • MACNETIC WELDING HOLDER"5 BKM-75

    Mega Hardware. MACNETIC WELDING HOLDER"5 BKM-75

    Out of stock

    Heavy Duty Construction: Magnetics Magnetic Welding Holder can hold up to 25 lbs Holding Power Safer- This Welding Magnet holder is magnetic so it can hold work pieces at 90, 45, and 135 degrees while leaving your hands free to work safely and efficiently. Widely Used: Welding, Soldering, Assembly, Marking-off, Pipe Installation, Floater and in Hanging Application If you are not satisfied, please contact us and we will arrange a refund immediately

    Out of stock

    4.450 JOD

  • LUGGAGE STRAPS 1M_C153

    LUGGAGE STRAPS 1M_C153

    8 in stock

    LUGGAGE STRAPS 1M_C153

    8 in stock

    1.500 JOD

  • LUGGAGE STRAPS 1.5M C154

    LUGGAGE STRAPS 1.5M C154

    5 in stock

    LUGGAGE STRAPS 1.5M C154

    5 in stock

    1.500 JOD

  • LOUTIL PARFAIT WALBY TRWEL 152MM

    LOUTIL PARFAIT LOUTIL PARFAIT WALBY TRWEL 152MM

    5 in stock

    Walby trowelCyprus modelWith index finger protectionTechnical description of the product Walby trowelTempered steel blade, varnished, polishedGooseneckBonded bi-material handle with index finger protection* Model with PEFC beech handle with mouthpiece and end cap

    5 in stock

    5.500 JOD

  • LOUTIL PARFAIT 18 CM

    LOUTIL PARFAIT LOUTIL PARFAIT 18 CM

    10 in stock

    This product has a trapezoidal shape. The model's ergonomics help the craftsman capture the right amount of mortar and then level it quickly and smoothly. The model has a perfectly smooth working blade, made of wear-resistant, hardened steel. The handle is made of natural wood and is firmly attached to the working canvas with a nickel-plated rim and equipped with a recoil pad. The trowel is PEFC certified.

    10 in stock

    3.250 JOD

  • LOUTIL PARFAIT STAINLESS STEEL TROWEL 28X12

    LOUTIL PARFAIT LOUTIL PARFAIT STAINLESS STEEL TROWEL 28X12

    10 in stock

    Stainless steel trowel for coating and smoothing Ergonomic composite handle Lightweight aluminum frame 0.6mm thick stainless steel blade Dimensions: 28 x 12cm

    10 in stock

    8.000 JOD

  • LOUTIL PARFAIT SQUARE TOOTHED TROWEL

    LOUTIL PARFAIT LOUTIL PARFAIT SQUARE TOOTHED TROWEL

    5 in stock

    Square TrowelWith index finger protectionUnbreakable impact tipSoft Line rangeTechnical description of the product Square TrowelTempered steel blade, varnishedComposite handle

    5 in stock

    4.000 JOD

  • LOUTIL PARFAIT SQUARE TOOTHED TROWEL

    LOUTIL PARFAIT LOUTIL PARFAIT SQUARE TOOTHED TROWEL

    5 in stock

    Product Description Square toothed trowelRecommended for laying on the floorTechnical description of the product Square toothed trowelStainless steel blade - Toothed on both sides - Square toothing - TKB CConsumption (As an indication): TKB: C2 - 2.9 to 3.2 (Kg/m²) TKB: C4 - 3.3 to 4.2 (Kg/m²) TKB: C5 - 4.6 to 5 (Kg/m²)Ergonomic bi-material handle, polypro frame for the rigidity/lightness compromise

    5 in stock

    7.750 JOD

  • LOUTIL PARFAIT ROUND TROWEL 200MM

    LOUTIL PARFAIT LOUTIL PARFAIT ROUND TROWEL 200MM

    5 in stock

    Product Description Round TrowelTraditional rangeTechnical description of the product Round TrowelHardened steel blade, varnished - PEFC beech wood handleNickel plated ferrule and cap

    5 in stock

    3.250 JOD

  • LOUTIL PARFAIT RIGID STEEL TROWEL

    LOUTIL PARFAIT LOUTIL PARFAIT RIGID STEEL TROWEL

    5 in stock

    Product Description Rigid steel trowelIncreased blade stiffnessTechnical description of the product Rigid steel trowelSteel blade - Thickness 0.6 mmLightweight aluminum frame 24 cmPEFC beech wood handle

    5 in stock

    6.000 JOD

  • KEY ZV NUT. 38MM CF

    CETA FORM KEY ZV NUT. 38MM CF

    Feature: Made of hot stamped precision hardened high quality chrome-vanadium-molybdenum steel. Coating: Triple matte chrome finish. Size: 38 mm. Length: 402 mm.

    25.000 JOD

  • KANZAWA PUTTY KNIFE AND WALL SCRAPERS 4IN

    KANZAWA KANZAWA PUTTY KNIFE AND WALL SCRAPERS 4IN

    5 in stock

    Product Description 1. Professional and practical design, beautiful appearance, convenient to carry and use.2. After heat treatment on the whole, it has high hardness and durability.3. Ergonomic design for comfortable grip.4. High quality material, durable and wear-resistant.5. Surface finishing plating treatment, high hardness and rust resistance.Specification:Condition: 100% Brand NewMaterial: 45# steelProduct function: maintenance

    5 in stock

    1.650 JOD

  • KANZAWA PUTTY KNIFE AND WALL SCRAPERS 3IN

    KANZAWA KANZAWA PUTTY KNIFE AND WALL SCRAPERS 3IN

    5 in stock

    KANZAWA PUTTY KNIFE AND WALL SCRAPERS 3in

    5 in stock

    1.100 JOD

  • KANGARO STAPLER ، MODEL:DS-160FL

    kangaro KANGARO STAPLER ، MODEL:DS-160FL

    10 in stock

    Brand:Kangaro Type:Staplers

    10 in stock

    4.000 JOD

  • K349-2 STRETCH CORD BARU K349-2 STRETCH CORD BARU

    0.600 JOD

  • Sale -33% K253M SANSHENG 50HRC

    Mega Hardware L K253M SANSHENG 50HRC

    Out of stock

    Out of stock

    3.000 JOD2.000 JOD

  • JUNIOR HACKSAW 150MM

    JUNIOR HACKSAW 150MM

    4 in stock

    Product Description Product Dimensions ‎26 x 6.5 x 1.5 cm; 116.23 Grams Item model number ‎70-14JR Colour ‎Grey Style ‎Standard Grip Power Source ‎Hand Powered Item Package Quantity ‎1 Number of Pieces ‎1 Blade length ‎150 Millimetres

    4 in stock

    1.100 JOD

  • مشحاف عريض 10 انش

    JUCO مشحاف عريض 10 انش

    5 in stock

    Product Description JUCO SIDE SCRAPER 10" 

    5 in stock

    0.900 JOD


You have seen 864 out of 1192 products

Login

Forgot your password?

Don't have an account yet?
Create account