ادوات الحفر والتلميع
Mega Hardware L Holso long 32mm
100% high quality and brand new. The gears are made from YG8 tungsten carbide steel and the rigidity varies from The hole saw has a twist drill bit inside, which is undetachable. 64HRC to 65HRC. Sharp gears and anti-cutting with lower consumption make the product a long service life. Carbide teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass. Can drill about 20mm depth Please note that if you cut the hard material such as steel, ceramic tile...you need to use the oil or water to low the temperature, if not, maybe the drill bit will be broken due to high temperature , please understand Application: drill machine, do not advocate the use of drill machine. Use the matters needing attention: The knife cut materials must be fixed, not mobile, and opening into a 90 degree angle. When the positioning drill through, please wait for a moment, and then slowly drilling. In the process of operation, such as abnormal or cutting is not ideal, please stop working, to cut down on the job. Upper and lower screws are not too hard, so as not to turn the screw slide, such as the appearance of the store does not bear any responsibility. Processing thickness more than 15MM, please go to the next spring, please do not drill metal material under 1.5MM. Available in the bench drill, magnetic drill, drill, the use of pneumatic drill, drill.
3.750 JOD
ZHWEI Holso stainless 20-32 mm
Center Drill: HSS Center Drill, Carbide tipped Center Drill Applicable Electric Drill: Portable electric drills (in the rotary-only mode). Not for Use Impact, Bench Drill Machine, Radial Drill Machine, and Magnetic Drill Machine Applications: Aluminum, Copper, Brass, Mild Steel, I Beam, etc. of up to 4 mm (5/32") thickness in combination with HSS Center Drill RP Plates, Hardened Steel, Stainless Steel, Resin Plates, etc. of up to 4 mm (5/32") thickness in combination with Carbide Tip Center Drill
2.500 JOD - 15.000 JOD
DeWalt DEWALT EXTREME SDS PLUS DRILL BIT 6
Superior carbide grade for long life and greater durability. Hardened steel body for extra strength and reduced drill bit breakage. Optimized flute design allows efficient debris removal. The 160° tip design ensures better bit penetration, longer life and faster drilling.
3.750 JOD
senhang 20mm stone blades
Specially developed robust head geometry with optimum 4 x 90° symmetry of carbide tip reduces jamming when hitting reinforcing steel. Centering point with 130 point angle ensures easy spot drilling with pinpoint accuracy and provides optimum guidance during drilling. The robust secondary cutting edge for 16mm diameters and larger, supports the primary cutter for faster drilling. Shorter spiral windings for faster transport of drilling dust from the head to the flute ensures less wear and heat build up at the tip. Wear mark on both sides of primary cutter guarantees diameter accuracy for anchor fittings – life time indicator in warranty cases. Patented reinforced flute geometry ensures lower vibrations for smoother drilling. The stronger flute means less breakages and better transfer of hammer energy to the tip. Deep flute shoulders give high volume dust removal for optimum drilling speed, less wear and heat build up. Suitable for drilling general masonry including brick, block, concrete, reinforced concrete and natural stone. PGM marked for guaranteed exact sized drilling holes to ensure anchor specifications are not compromised.
1.000 JOD
Makita STANDARD SDS-PLUS 8mm
2 SDS cutter plus drill bits suitable for masonry and concrete. The solid carbide tip with centering point and optimized flutes offers fast drilling speeds in a contractors, low cost option. TCT tip manufactured to DIN 8039 available from 4mm - 30mm diameter.
1.350 JOD
Makita MAKITA D-00131 SDS-PLUS BIT, MULTI-COLOR
Adapted for SDS-plus hammers Solid carbide tip Longer life Suitable for masonry and concrete Manufactured to DIN8039 standard Diameter 8mm Overall length 160mm
2.250 JOD
INECO TRANSFORMER MAX TO SDS PLUS INCO
Switch from MAX to SDS PLUS
15.000 JOD
senhang Holso Diamond 70mm
Product Name: 70mm Diamond tip drill bit, 70 mm Glass hole saw bit, Glass drill bit Hole Diameter: 70mm (2-3/4″); Shank Diameter: 10mm (3/8"); Total Length: 55mm Suitable for use in drill hole on glass, tile, ceramic, stone, marble or granite These diamond drill bits are made of high-speed steel, Excellent for making clean and accurate holes The hole does not need further work because the cut is clean, start drilling at 45 degrees to the surface and align to 90 degrees as the hole forms,
6.750 JOD
zhewei Holso Diamond 50mm
The diamond core bit is used to drill holes in: Ceramic tiles Marble Grade 5 porcelain (hardest) Granite Glass Slate The diamond core cuts faster, smoother and lasts longer than any other core drills.
4.000 JOD
CETA FORM Holso Cetaform 41mm
Code J40-041 Size(mm) 41 Size(inch) 1-5/8" Length(mm) 44 Explanation DuraMAX quality, 4/6 variable thread structure, super HSS alloy threads, spring steel body
7.250 JOD
CETA FORM Holso Cetaform 73mm
16.000 JOD
CETA FORM Holso Cetaform 35mm
DuraMAX quality, 4/6 variable thread structure, super HSS alloy threads, spring steel body
8.000 JOD
CETA FORM Holso Cetaform 35mm
DuraMAX quality, 4/6 variable thread structure, super HSS alloy threads, spring steel body
7.000 JOD
CETA FORM Holso Cetaform 16mm
Code J40-016 Size(mm) 16 Size(inch) 5/8" Length(mm) 55 Explanation DuraMAX quality, 4/6 variable thread structure, super HSS alloy threads, spring steel body
4.250 JOD
CETA FORM Holso Cetaform 19mm
4.750 JOD
Mega Hardware L DRILL CHUCK, 3-JAW KEY CHUCK WITH SDS-PLUS ROUND SHANK
Product Name: Drill Chuck Thread Mount: 3/8inch-24UNF Capacity: 1.5mm-10mm Drill Chuck Overall Size: 57 x 33mm/2.24 x 1.3inch(L*D) Adapter Material: 40cr Shank Type: Round Shank
3.000 JOD
CETA FORM Holso Cetaform 38mm
5.500 JOD
Mega Hardware L Drill nut 3-16 mm
9.500 JOD
BRIED Drill nut 20 mm
Features & Benefits Threaded or tapered mounts on Heavy-Duty and Medium-Duty models. Center-ground jaws provide absolute straightness and alignment. One piece sleeve design eliminates cracks between driving teeth. Sleeve teeth, nose piece and keyholes are through-hardened, providing outstanding wear resistance.
12.500 JOD
TIESHOU Drill nut wrench 13 mm
Item Name: Chuck Key; Maximum Diameter: 20mm Minimun Diameter: 15mm;Central axis Diameter: 8mm Number of teeth : 11;Measurement : 83 x 48mm / 3.37" x 1.89" (L*W) Material: Metal; Weight: 62g
0.500 JOD
10.000 JOD
12.500 JOD
PROSKIT Brusket brush
Product Description These conductive plastic, straight or curved handle brushes are used for thorough component cleaning. Resistivity: 10 3 ~10 9 Ω Model No. Handle Resistivity OAL.(mm) Individual Packing AS-501A Conductive pp 10 3 ~10 9 Ω 180 Blister Card
2.900 JOD
JAZ Wire brush
Strong and durable with solidly imbedded brass bristles Wood shoe handle with pre-drilled hole for hanging Will not rust
7.250 JOD
JAZ Stainless wire brush
Wood handle wire brush. 4 rows of steel wire bristles. Ideal for removing rust, paint, and descaling.
5.000 JOD
JAZ Steel wire brush
3.000 JOD
3.750 JOD
2.000 JOD
JAZ WIRE BRUSH NUMBER OF ROWS: 1; 0.30MM
Brush with iron curved blade and plastic handle. The wavy bristles provide a flexible and compact brush. Suitable for removing rust, corrosion, paint, primer and burrs.
5.000 JOD
JAZ CUP BRUSH TWISTED STEEL 65 MM 0.50 MM
Single row cup brush, the twisted steel bristles give a long life and guarantee a large decrease but give a rough finish. Suitable for removing strong rust, paint stripping and deslagging.
8.000 JOD
JAZ CORRUGATED WIRE CUP BRUSH IN BRASS-PLATED STEEL WITH 6 MM SHANK
Ideal for removing paint or rust from any type of metal surface. Corrugated brass-plated steel wire Ø 0.30 mm.
3.500 JOD
16.000 JOD
JAZ 150MM CRIMPED WIRE WHEEL
For the removal of rust, paint, scale, edges etc.; Cleaning of forged pieces; Surface processing in metal, rubber, plastic, wood, glass etc.
9.000 JOD
JAZ Soft copper wire brush on the missile 10"*250 mm
• Specially designed for low weight & high speed mini-grinders (11000 RPM) • High removal capacity & efficiency at high speed performance • Special design allows access to angles & flexible performance on any surface APPLICATION: For continuous and frequent brushing processes (ship building metallic structures welding maintenance etc.) Specially designed for low weight & high speed mini-grinders (11 RPM) High removal capacity & efficiency at high speed performance
18.000 JOD
Mega Hardware L 3PCS METRIC HEX SHANK STRAIGHT FLUTE
type HSS Drill Bit application Metal Drilling size 4-12mm, 4-20mm, 4-32mm flute type Straight Flute shank Hex Shank process Fully Ground material HSS or Cobalt M35 point degree 135 degree Split Point surface finish Titanium coated supply ability 300000sets per month carton/set/piece/box Set lenght,width,height 40*25*18cm
10.900 JOD
DREMEL Drum accessories set 80 pieces
80pcs Woodworking Accessories Set 2 stackable Drawer Per Set 2 additional attachement for various application Using Dremel SpeedClic System Professional Qualities Ease of Usage
51.000 JOD
