Product Description Bison Glass 2 ml glue is a high-quality glass glue that can also be used in combination with metals. Very strong special transparent glue curing by UV radiation in daylight for bonding glass and crystal. After hardening, it has high resistance to UV radiation and temperatures from -50°C to 130°C. It is also resistant to oils, dilute acids and alkalis. The glued joint remains elastic and balances the internal stress. The glue is suitable for bonding glass - glass and glass - metal combinations. It is not suitable for gluing safety glass.Manual:• The glued parts must be clean, dry and degreased.• Apply the glue to one surface of the glued material.• Immediately press together and fix.• Let the sunlight work until the glue hardens (10 - 20 seconds).The speed of curing depends on the intensity of daylight. In the dark and under artificial lighting, the glue does not harden at all. The glued joint reaches handling strength after 5 minutes and functional strength after 10 minutes, depending on the intensity of sunlight. Remove unhardened glue with acetone, hardened glue only mechanically. Store in a dry, cool place and protect from the effects of daylight. Do not use at temperatures below +10°C. Stick the glued object on a table near a closed window, open the window for hardening and let UV radiation work. The more sunlight, the faster the reaction.

Read more less

  BISON 1.5M*19MM DOUBLE FIX TAPE_TRANSPERANT Description: Very durable double-sided transparent adhesive tape. Can be used as a substitute for screws and nails with exceptionally high durability. Intended for interior work (in the bathroom, kitchen, etc.) - for attaching small objects (soap dishes, plastic hooks, mirrors, information plates, wall decorations, thermometers). Removes decorations, carpets, telephones, etc. possible movement of objects.  Does not damage the surface, is impermeable to moisture. Technical specification: Width, mm 19 Length, m 1.5

Read more less

Product Description This silicone is used to seal cracks and edges of windows and glass doors and install them from the cornersUsed in the management of agricultural products that contain glassEase of useSmall weight can to get into the exact placesIf you are looking for a source to get the required information

Read more less

Product Description Bison Poly Max Express is a universal mounting adhesive and sealant with a fast final build-up. Montagekit polymax is also suitable for sealing cracks in walls and ceilings. The Best Assembly Kit Bison polymax kit is suitable for bonding, mounting and sealing different surfaces. Bonding: glass, stone, natural stone, concrete, plaster, many plastics, wood, chipboard, Trespa, iron, aluminium, zinc, steel, mirrors, stainless steel, etc. Installation: carpentry, slats, baseboards, window sills, thresholds, fascias, panels, plasterboard, moldings, etc. Sealing : window frames, stair treads, window sills, thresholds and plasterboard How to use Bison Polymax glue? Only process at temperatures between +5°C and +40°C The surface must be clean, dust free and dry for maximum adhesion. Gluing and mounting: Apply the glue in strips or dots (every 10-40 cm) and always at the corners and along the edges of the material. Apply the material to the right place within 10 minutes and press firmly or tap lightly with a rubber hammer. If necessary, clamp or fasten heavy materials for 4 hours. Hand-tightened after 2 hours, the joint is now strong enough for transport or a light load. Maximum final strength after approx. 4 hours, depending on substrate (at least 1 porous material) and ambient conditions. Sealing: Apply the sealant evenly to the bottom of the joint and smooth within 10 minutes with a damp putty knife (soapy water without lemon), a sealant spreader or your finger. Smooth vertical joints from bottom to top. Hardening is complete after a few days (depending on the thickness of the layer). When repainting with alkyd paints, the paint may dry more slowly. Use white spirit to remove wet glue residue. Features of Bison Polymax Express Super fast increase in end strength Very high final resistance Permanent elasticity Applicable indoors and outdoors Can be painted (to be tested beforehand) Good filling capacity Resistant to temperatures from -40°C to +100°C UV, water and weather resistant 100% adhesive (non-shrinkable) Adheres to slightly damp substrates Solvent free Excellent adhesion without primer Acid-free, odorless

Read more less