Chrome Nipple Size  3/4″ ITALY

Features WATER SAVING Water-saving for ecological and economical sense.

YMS MIX SWAN SINK MIXER5 Years Manufacturer Company GuaranteedBrass BodyChrome PlatedEasy to CleanEasy AssemblyWATER OUTLET LENGTH: 15,5 CM WATER OUTLET HEIGHT: 24 CMEN: Certified Turkish Made TSE TS EN 200 in accordance with European Standards,

Features of water dispenser tap BS-08: 1) Water dispenser faucet 2) Easy to install and clean 3) Inner screw or outer screw4) Match most water cooler 5) Guarantee not to leak Specifications: Diameter: 4cm Outer packing: 50pc per carton Carton: 44 x 43 x 107cm GW/NW: 15kgs/14kgs 

ITALY  PUSH HAND SHOWER WITHOUT HOSE

Swan neck tap spout Chrome

Swan neck tap spout Chrome ITALY

Specifications: Materials:brass Installation Type:thread mounting Nominal Pressure:atmospheric pressure Opening Method:wrench type Type:DN15   Features: - Brass materials, durable and not easy to rust. - Threaded interface for easy installation. - Suitable for ibc tank.

Flexible, eccentric 20mm sewage connection. 90-110mm inlet with lip seal, 110mm outlet with flange seal.

The tap hole cover reliably closes open tap holes in sinks or bathtubs. It decorates openings that are not required and contributes to bathroom design. Its diameter is 1.5"mm. It is attached by simply screwing it together. No lever function on the pool is required for this. The cover is made of robust brass with a chrome-plated surface.

The tap hole cover reliably closes open tap holes in sinks or bathtubs. It decorates openings that are not required and contributes to bathroom design. Its diameter is 0.5" . It is attached by simply screwing it together. No lever function on the pool is required for this. The cover is made of robust brass with a chrome-plated surface.

MADE IN TURKEY

For external application. The frame and aperture cover are made of extruded aluminum, the lid is easy to open with a lifting key. Suitable for tiles (for 40 mm and 60 mm high lids). Suitable for tiles and pavers (for 80 mm and 100 mm high lids). The bottom is made up of a galvanized steel plate (3 mm). The lid is odour-proof and water-tight. The lid is not screwed. The lid has an EPDM seal at the bottom and a rubber T seal on the ledge, which prevents dirt from depositing between the frame and the lid. Maximum load: 20 kN, with a concrete filling of at least 4 cm.