Plumbing Fitting
Mega Hardware L نبل كروم ايطالي 3/4انش
0.900 JOD
Mega Hardware L نبل كروم ايطالي 0.5انش
0.800 JOD
Jindal نبل منقص 1/2*3/4 كروم ايطالي
1.250 JOD
Jindal سدة نحاس 1/2 إنش
0.500 JOD
Jindal تي 1/4 انش نحاس ايطالي
2.350 JOD
Mega Hardware L سدة نحاس 3/4 إنش
1.250 JOD
Mega Hardware L تي شيرت كروم 3/8 إنش
1.500 JOD
Mega Hardware L محبس نحاس 3/8 انش
1.500 JOD
Mega Hardware L تي نحاس 16 ملم
3.500 JOD
Mega Hardware L كوع كروم ايطالي 0.5انش
1.650 JOD
PATTARONI كوع مع شد وصل نحاس 1 انش
The 3/4-in SharkBite push-to-connect elbow allows you to make a 90° connection to any combination of 3/4-in copper, CPVC or PEX pipe. SharkBite fittings are the easiest way to join pipe and do not require soldering, clamps, unions, glue or tools to complete the job. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.Lead free DZR brass construction for durability and reliability
6.500 JOD
BG شد وصل 1/2 انش
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure,Separation Strength TestVacuum TestThermal Cycle TestPressure Cycle TestTensile Corrosion Resistance TestCoating Thickness Determination Test (It is applied to the material other than standard tests.)Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C.Attachments must be installed by a qualified plumber.Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation.Attachments should be used with original fittings.Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings.During assembly, the attachment must be tightened with a suitable key from the key mouth parts.Abrasive materials should not be used for attachment cleaning.The installation must be protected against the risk of frost.It should be protected against external impacts during storage, transportation, assembly and use. All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile
2.250 JOD
BG شد وصل 1 انش
All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure,Separation Strength TestVacuum TestThermal Cycle TestPressure Cycle TestTensile Corrosion Resistance TestCoating Thickness Determination Test (It is applied to the material other than standard tests.)Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C.Attachments must be installed by a qualified plumber.Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation.Attachments should be used with original fittings.Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings.During assembly, the attachment must be tightened with a suitable key from the key mouth parts.Abrasive materials should not be used for attachment cleaning.The installation must be protected against the risk of frost.It should be protected against external impacts during storage, transportation, assembly and use.
5.500 JOD
1.650 JOD
STAREX لقمة تختاية 3/4 انش
4.000 JOD
Mega Hardware L مصفاة ستانلس 4*4 انش
Our company holds specialization in exporting FLOOR DRAIN WITH GRATING COVER to our precious customers. These offered products are manufactured from the finest quality of raw material that is sourced from reliable suppliers of industry. This product is highly respected in the market due to strength, low maintenance, and low prices. With our wide distribution network, we transport these products within given time period.FEATURES: Minimum maintenance Light in weight Matchless quality 4"*4" Floor Drain with Grating Cover
2.750 JOD
HOTIC مصفاه كبس 6 انش
5.500 JOD
AKSA نقاصة 3/4_1/2 انش
2.250 JOD
CHANAL ادابتر ذكر سن نحاس 1/2 انش
0.650 JOD
COSTA براغي لسخان الماء
0.750 JOD
Mega Hardware L غطاء مصفاه شبك ابيض
0.250 JOD
C.G.S. بربيش ستيل مجدول 30 سم
1.200 JOD
COSTA طقم بربيش عدد 2 ستانلس 60 سم
- Long 60CM Hot & Cold Water Hoses- US standard 1/2" FIP fitting- M10 male vessel sink faucet connection. Fits most vessel sink faucets.- Stainless steel braided exterior- Durable and flexible- UPC, cUPC, NSF certified. CA AB 1953 lead free compliant.SPECIFICATION:- Part Number: SL-VSF12-27- Length: 60CM- Fitting: 1/2" FIP- Inner Diameter: Approximately 6 mm- Certification: UPC, cUPC, NSF certified. CA AB 1953 lead free compliant. -
4.000 JOD
COSTA طقم بربيش اسباني ستيل40 سم
- Long 30CM Hot & Cold Water Hoses- US standard 1/2" FIP fitting- M10 male vessel sink faucet connection. Fits most vessel sink faucets.- Stainless steel braided exterior- Durable and flexible- UPC, cUPC, NSF certified. CA AB 1953 lead free compliant.Specification:- Part Number: SL-VSF12-27- Length: 30CM- Fitting: 1/2" FIP- Inner Diameter: Approximately 6 mm- Certification: UPC, cUPC, NSF certified. CA AB 1953 lead free compliant.
2.500 JOD
RECO مقاومة كيزر ايطالي 3000 ايطالي
Electric heater tubular heating element with thermostat The electric heating tube is a metal tube, along the tube in the center of the central axis of the spiral electric heating alloy wire (nickel chromium, iron chromium alloy) filled with the gap with a good insulation thermal conductivity of magnesia sand, Or ceramic seal. Electric heating tube is a special electrical components into electrical energy, because of its cheap, easy to use, easy installation, no pollution, is widely used in a variety of heating occasions, stainless steel heating tube life is very long, generally designed to use Life of more than 10,000 hours.
13.100 JOD
RECO مقاومة كيزر 1500 واط
The electric heating tube is a metal tube, along the tube in the center of the central axis of the spiral electric heating alloy wire (nickel chromium, iron chromium alloy) filled with the gap with a good insulation thermal conductivity of magnesia sand, Or ceramic seal. Electric heating tube is a special electrical components into electrical energy, because of its cheap, easy to use, easy installation, no pollution, is widely used in a variety of heating occasions, stainless steel heating tube life is very long, generally designed to use Life of more than 10,000 hours. Electric heater tubular heating element with thermostat Body Material T2 Copper;SUS304;SUS316L;SUS310S,and so on. Pipe Size 8mm Watt & Voltage Customized Overall Dimensions OEM, customized in drawing or samples Electrical Performance AC1500V/0.5mA.3S;DC500V 100MΩ;Leakage current<0.5mA Surface Treatment Natural color bright, polish Flange material The weight of 1 1/4" copper flange is about 110g,1 1/4"SS flange.No serious leakage solder inside of flange Paraller error of ends face and terminal 0.5mm
7.800 JOD
McAlpine مصفاة 1/2 1 انش
Description: McAlpine 1½" Centre Pin Bath Waste: 70mm Stainless Steel Flange: Plug Size: 1½" Flange Style: Stainless Steel Flange Size: 70mm Standard: EN 274-1:2002 Additional Info: The Centre Pin Dry Fixing Connection has the advantage of a quick, simple and neat installation and affords a saving in material and labour costs
1.350 JOD
Mega Hardware L كبسه شطاف كروم ايطالي
2.700 JOD
FIL-NOX بربيش ستانلس 60 سم
1.750 JOD
COSIA بربيش مجدول 70 سم اسباني
1.600 JOD
COSIA بربيش مجدول 60 سم اسباني
1.650 JOD
Mega Hardware L SQUAT TOILET CHECK VALUE
0.650 JOD
SHURJOINT مربط بربيش كمبريسه 2" احمر
Grade "T" Nitrile (Color code: Orange stripe) Temperature range: -20° to 180° F DO NOT use with HOT WATER above 150° F Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range Also good for water services under 150° F The Model 7705 Standard Flexible Coupling is a standard flexible coupling for use in a variety of general piping applications of moderate pressure services. The model 7705 couplings features flexibility that can deal with misalignment, distortion, thermal stress, vibration and noise and also resist seismic tremors. With the use of Model 7705 couplings you can even design a curved layout. See Typical Applications Flexible Couplings on Shurjoint cut sheet #B-19. All Model 7705 couplings are comprised of two identical ductile iron housings segments, EPDM rubber gasket and plated track bolts & nuts. Housings segments are supplied with our standard painted finishes, i.e. orange or RAL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available. 7705couplings should always be installed so that the coupling bolt pads make metal to metal contact. Grade “T” Nitrile (Color code: Orange stripe). Temperature range: -20° to 180° F. DO NOT use with HOT WATER above 150° F. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Also good for water services under 150° F.
8.000 JOD
Mega Hardware L محبس فرعي 3/8 انش
PK Aqua 1 Pcs RO Tank Ball Valve-Quick Connect Switch for RO Water Purifier. High Quality Plastic Valve for 1/4" Threaded x 1/4" RO Tube Quick Connect Fit. Spec Size - 1/4" Thread x 1/4" Tube Quick Connect Type Plastic On/Off Valve. Pack Contains : - 1 Pcs of RO Plastic Tank Ball Valve Manual On-Off Valve (1/4" Threaded x 1/4" Quick Connect Tube) as shown in photo.
1.750 JOD
Mega Hardware L يد بطاريه جير
4.250 JOD
Mega Hardware L فراشي سلك مبروم
2.000 JOD