Product Description Hybrid resin adhesive for anchor rods and threaded rods with ETA approval Approved for cracked and non-cracked concrete and hollow blocks  The 300ml cartridge can be processed with a good standard silicone gun. The 410ml cartridge needs its own gun to apply. - For indoor and outdoor use. - Structural applications - Fastening of building structures. - Reinforcing steel and reinforcing steel. - For fixing machines, balconies, awnings, shelves, billboards, catenary, protective barriers, railings, handrails, etc. - Large dimensions, retaining walls - Approved for cracked and non-cracked concrete and all types of concrete applications. - Contact with drinking water certificate (WRAS). - Fire resistance certificate for bolts and reinforcing bars (IBMB). - Tested bolts M8-M30, also M27. - Use of fittings such as anchorages from 8 to 25. - For use with heavy loads. - Styrene free. - Valid for dry holes, wet and flooded - For use with static or quasi-static loads. - Versions in galvanized steel, stainless steel A2 and A4. - Suitable temperature range: -40C to +80C (long term maximum temperature +50C).  

Product Description 【Complete Drill Set】- Package includes7pcs 3-point countersink drill bit, 8pcs wood plug cutters, 6pcs countersink drill bits, 1pcs l-wrench and 1pcs center punch for wood. They can almost meet all brick and wood hole extraction needs of professionals or beginners. They are in metric size, and inches are converted. 【3-pointed Countersink Drills】- 3-point countersink drill bits include 3mm(0.11"), 4mm(0.15"), 5mm(0.19"), 6mm(0.23"), 7mm(0.27"), 8mm(0.31"), 9mm(0.35"), 10mm(0.39") for drilling pilot holes. Drill tips adopt 3-point design for quick and accurate center punching, large chip flute and five edge chamfer allows faster and easier discharge of sawdust. 【Wood Plug Cutters】- Wood plug set includes 4 standard plug cutters and 4 four-tooth chambered cutters. Their shank diameters are 9.5mm(0.37"), tail diameters size are 6mm(1/4"), 10mm(3/8"), 13mm(1/2") and 16mm(5/8"). 【Countersink Drill Bits】- 1/4" hex 5 flute 90° countersink drill's diameters are 6mm(1/4"), 8mm(5/16"), 9mm(3/8"), 12mm(1/2"), 16mm(5/8"), 19mm(3/4"), 90° angle on the point are designed for sharp and precise countersinking, five-flute designed with staggered cutting teeth can insure free chip flow and rapid chatter free cutting. 【Wide Application】- Our woodworking chamfer drilling tools can be mounted on electric drill, hand electric drill, bench drill, etc. They can be used to drill holes in wood, particle board, fiberboard, logs, plastic boards, PVC pipes, etc.

Product Description ECO_27-1030104_10*40CM MASONRY DRILL BIT_ريش حجر الماني طويل 

Product Description ECO_L400/27-1030084_8MM*40CM_ريش حجر الماني طويل 

Product Description ZHWEI_725_4MM BIT_ريشه تخويشه

The universal drill bit Goldcraft is the perfect solution for drilling in almost all materials due to the special cutting edge geomety and the diamond-trond cutting surface of the carbide tip. The very hard tungsten-titanium carbide tip make the drill bit extremely wear resitant. For use in masonry, natural stone, artificial stone, steel, wood, plastic, glass, ceramics, tiles/roof tiles. Features and Benefits: Special cutting edge geometry. Diamond ground carbide tip. Milled flute for optimum removal of drlling dust. High-temperature brazing at about 1120°C. Special cutting helix with micro surface hardness. iso 5468.

Industrial quality drill bits for metal, wood and plastic. Titanium-coated for prolonged working life.

Industrial quality drill bits for metal, wood and plastic. Titanium-coated for prolonged working life.

Product Description MEGA GRANITE DRILL BITS MEG0610

Product Description DRILL FOR WOOD 6x95mm SPIRAL ECONOMY MAKITA Mounting type: cylindrical Packaging type: single Package content: one size Working length: 55mm Diameter: 6mm Overall length: 95mm

Product Description DRILLKO DRILLBIT 4.5MM FOR STEEL

Product Description ZHWEI_22MM 1000RPM SPIRAL BIT _775ريشه حلزوني

Product Description 14MM WOOD FLAT BIT

MEGA_HT_MG16671_Mix Paddle 100mmx600mm

MEGA_HT_MG16672_Mix Paddle 120mmx600mm

Product Description Diameter (D): 10 mm Working length (L1): 100 mm Total length (L2): 160 mm Drill bit, designation: SDS-plus-1 Shank, shape: SDS-plus Packaging type: Plastic pouch Part no.: 2608680273

Product Description Makita SDS Plus Drill Bit 10mm X 160mm- D-00561- SDS plus drill bits suitable for masonry and concrete.- The solid carbide tip with centering point and optimised flutes offers fast drilling speeds in a contractors, low cost option.- Standard range.- Size: 10X160MM.- Brand : Makita.- Concrete drilling is the best.- Is the popular type SDS Phillips head bits.- Available in hammer drill SDS Plantype company power tool manufacturers.

Product Description Suitable for all soft and hard woods, even wet wood Ideal for use in ancillary building trade, for joiners and roofers Can be used in all drills with 13mm chuck For through-holes, pre drilling for rafter nails and for deep dowel holes Precision ground for accurate dimensional stability when drilling Fast drilling rate due to optimised flute geometry High break resistance, fine surface finish Dimensions: 18mm x 160mm x 235mm  Shank, shape: Hex shank Material that can be processed: Wood Materials that can be processed, other: Pine|Beech wood|Wet wood Drill bit, shape: single spiral Cutter, type: Main blade and pre-cutting blade Cutting direction: right

Crafted from hardened alloy steel for long life, DEWALT Long Power Ship Auger Bits feature a dual-cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration, and hollow center flute provides aggressive chip extraction. Heat treated and tempered for long life.

Product Description The multi-purpose drill bits allows users to carry fewer bits for construction work as one bit can be used for many applications For precision drilling in tiles, natural stone, wood with nails and plastics PGM certification ensures good quality, precise tolerances and firm grip in the chuck Centred tip provides stable fixation for hand-held operation and improved guidance while drilling Best results are achieved using low rpm Only for rotary operation with a power drill Cylindrical shank Packed in plastic tube with hanger

Product Description HIGH QUALITY: High quality alloy blade, hardened, tempered and carbon HSS steel construction make blade more sharp and durable. More smooth, less noise. GREAT PERFORMANCE: Sharp edge, accurate positioning, high hardness, impact resistance, high precision, smooth cutting, high toughness. Forstner Drill Bits can drill clean flat bottom holes with no chipping. PERFECT DESIGN: Small incision resistance, improve the opening speed. It's head adopt arc curve design, beneficial to chip removal, perforation is more efficient. WIDE APPLICATIONS: Can be used for wood products perforation, mounted spherical door shoot tip, drawer, plastic products, wood, plywood, etc. Suitable for pistol drill, bench drill, vertical drilling machine hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine, etc. PERFECT SIZE: The size of this hole saw is 50mm (2"). We provide many other size hole saw to meet your professional needs, such as 15mm (19/32"), 17mm (43/64"), 20mm (25/32"), 23mm (29/32"), 25mm (1"), 28mm (1-1 / 10"), 30mm (1-3 / 16"), 35mm (1-3 / 8"), 40mm (1-3/5"). Please choose your needed item.

Product Description Makita MKD-05387/05555 ACC Masonry Straight Shank Drill Bit has solid carbide tip with centring point. It optimised flutes to offers fast drilling speed. Features 2 cutter TCT tip. This drill bit is suitable for drilling into masonry, brick, block, stone, light concrete and more. More Information Brand Makita UPC/EAN 088381176613 Included Component 1 x Makita MKD-05387/05555 Accessories Masonary Straight Shank Drill Bit, 16 mm Diameter x 150 mm Overall Length Model Number MKD-05387/05555 Model Name Drill Bits and Chisels