MADE IN ITALY CHROME PUSH HAND SHOWER WITHOUT HOSE

MADE IN SPAIN

Grade "T" Nitrile (Color code: Orange stripe) Temperature range: -20° to 180° F DO NOT use with HOT WATER above 150° F Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range Also good for water services under 150° F The Model 7705 Standard Flexible Coupling is a standard flexible coupling for use in a variety of general piping applications of moderate pressure services. The model 7705 couplings features flexibility that can deal with misalignment, distortion, thermal stress, vibration and noise and also resist seismic tremors. With the use of Model 7705 couplings you can even design a curved layout. See Typical Applications Flexible Couplings on Shurjoint cut sheet #B-19. All Model 7705 couplings are comprised of two identical ductile iron housings segments, EPDM rubber gasket and plated track bolts & nuts. Housings segments are supplied with our standard painted finishes, i.e. orange or RAL3000 red. Optional finishes such as hot dipped zinc galvanized and custom epoxy coatings are available. 7705couplings should always be installed so that the coupling bolt pads make metal to metal contact. Grade “T” Nitrile (Color code: Orange stripe). Temperature range: -20° to 180° F. DO NOT use with HOT WATER above 150° F. Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Also good for water services under 150° F.

Non return check valve fully made of brass with spring mechanism to let the water flow only one waySpecifications:- Material: Brass;- Insert material: Brass;- Thread type: Female x Female;- Max. Working Temperature: +100C;- Gasket type: NBR (flat). Non return check valve fu Non return check valve fully made of 

UV ResistantPVC fittings have a healthy additive that inhibits the impact of sunlight and other ultraviolet sources on the molecular structure of the PVC. Without this, the PVC would yellow, crack, become brittle and break.Impact ProofPVC fittings can take a beating. They are designed to withstand impacts, or drops from a substantial height and will not suffer any cracks or breakage compared to standard, plumbing-grade PVC fittings.100% CompatibleStructural Grade PVC pipe and fittings are dimensionally compatible to plumbing-grade PVC fittings.Easy to installThey are resilient, with high-tensile and high-impact strength. Installation requires the use of primer and solvent cement.

UV ResistantPVC fittings have a healthy additive that inhibits the impact of sunlight and other ultraviolet sources on the molecular structure of the PVC. Without this, the PVC would yellow, crack, become brittle and break.Impact ProofPVC fittings can take a beating. They are designed to withstand impacts, or drops from a substantial height and will not suffer any cracks or breakage compared to standard, plumbing-grade PVC fittings.100% CompatibleStructural Grade PVC pipe and fittings are dimensionally compatible to plumbing-grade PVC fittings.Easy to installThey are resilient, with high-tensile and high-impact strength. Installation requires the use of primer and solvent cement.

Product Description BALL VALVE 1"1/2

Mega Tool Box 22*25*46cm

1/2" Coupling Fitting SCH80

The non return valve aids pump priming, and ensures that the system remains flooded at all times. The strainer offers simple pump inlet protection (Coarse filter mesh) from any debris or particles in the fuel.   3/4" BSP female connection Brass body Stainless steel spring NBR Seals Suitable for diesel, oil, kerosene or water

Product Description BALL VALVE 3/4" WITH HOLLANDER (ITAP)

304 stainless steel castings conform to ASTM A351 ACI Grade CF8 316 stainless steel casting conform to ACI Grade CF8M (316) NPT threads on pipe fittings conform to ASME B1.20.1 Manufacturing facility is ISO 9001:2008 Certified pipe fittings meet applicable chemical & mechanical properties Quality guarantee on all pipe fittings

304 stainless steel castings conform to ASTM A351 ACI Grade CF8 316 stainless steel casting conform to ACI Grade CF8M (316) NPT threads on pipe fittings conform to ASME B1.20.1 Manufacturing facility is ISO 9001:2008 Certified pipe fittings meet applicable chemical & mechanical properties Quality guarantee on all pipe fittings

This GRAINGER APPROVED reducing coupling is generally used in hospitals, schools, commercial bathroom installations, and other plumbing applications where yellow brass cannot be used.

Product Description CHROME PLATED ELBOW 3/8"on

Straight male fitting 3/4" 20mm Italy

Straight male fitting 1/2" 16mm Italy

Product Description NIPPEL MALE CHROME 3/4"

Chrome C.P Extension Nipple Size : 1/2″ x 15MM

The tap hole cover reliably closes open tap holes in sinks or bathtubs. It decorates openings that are not required and contributes to bathroom design. Its diameter is 1.5"mm. It is attached by simply screwing it together. No lever function on the pool is required for this. The cover is made of robust brass with a chrome-plated surface.

CHROME TEE 3/8 FEMALE 54X28MM

The 3/4-in SharkBite push-to-connect elbow allows you to make a 90° connection to any combination of 3/4-in copper, CPVC or PEX pipe. SharkBite fittings are the easiest way to join pipe and do not require soldering, clamps, unions, glue or tools to complete the job. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. SharkBite fittings are certified for potable water supply and hydronic heating applications. Get SharkBite and get a grip on your next plumbing project.Lead free DZR brass construction for durability and reliability

All installations made using PEX PIPE, such as FIRAT PEX underfloor heating systems, FIRAT PEX mobile heating systems, FIRAT PEX clean water systems are also used as fittings. In the body, inner parts and fittings of Fırat Pex Pipe Metal Fittings, MS 58 brass material is used, and EPDM O-Ring is used to ensure tightness. PEX PIPE Metal Fittings are produced in accordance with TS EN 1254-3 standard. In accordance with TS EN 1254-3 standard, the following tests are applied to Pex Pipe Metal Fittings. Leak Test Under Pressure,Separation Strength TestVacuum TestThermal Cycle TestPressure Cycle TestTensile Corrosion Resistance TestCoating Thickness Determination Test (It is applied to the material other than standard tests.)Pex Pipe Metal Fittings Installation and Usage Information The installation pressure should not exceed 10 bar and the operating temperature should not exceed 105 ° C.Attachments must be installed by a qualified plumber.Any foreign matter (dirt, sand etc.) in the installation must be cleaned before installation.Attachments should be used with original fittings.Suitable sealing materials (Teflon tape) should be used on the threaded parts of the fittings.During assembly, the attachment must be tightened with a suitable key from the key mouth parts.Abrasive materials should not be used for attachment cleaning.The installation must be protected against the risk of frost.It should be protected against external impacts during storage, transportation, assembly and use.

Hardened stainless steel blade Bi-material handle Aluminum through-tip

- Fine polished stainless steel blade - Riveted rosewood handle  - Aluminum rivets and eyelet