Description: HSS bimetallic drill bit for metal drillingDiameter: 35 mm.Length: 48 mm.

Unique method for making deep holes in concrete. Fast drilling without the need of adapters and centering drills. Symmetrical head-geometry with centering-tip for optimised results in the event of reinforcement. Application: ConcreteFeatures: One piece TCT core cutter. Long length. Diameter (D) 55 mm Overall Length 550 mm Shank SDS-MAX Pack Quantity 1 

Industrial hole saw kit produced with 8inch holesaws. These variable pitch hole saws have been the industry standard fordecades.Manufactured with hardened heat resistant and positive rake highspeed steel teeth welded to a durable alloy backing and cap.They are exceptionally strong, safe, and shatter resistant. These tools effectively and economically cut a wide variety of materials including Aluminum Sheet, Plastic, Wood.Falcon hole saw can also be used for ceiling lights in gypsum, wood and plastic ceiling.

APPLICATION: For the removal of welding & forge scale APPLICATION: For the removal of welding & forge scale

This unique brush material is made of a special nylon filament impregnated with silicon carbide. Lasts up to six times longer then conventional wire brushes. Uses include Truck bed and body cleaning, polishing, deburring, scrubbing and brightening, surface refinishing and decorative finishing. Use on metal, wood, aluminum, and plastic surfaces.Specifications: 3" Diameter with 1/4" Shank Max R.P.M. : 4,500 Non-Sparking [Will not react with metal] Non-Oxidizing

Industrial quality drill bits for metal, wood and plastic. Titanium-coated for prolonged working life.

Industrial quality drill bits for metal, wood and plastic. Titanium-coated for prolonged working life.

Drive: 11 mm (7/16�) Thread: 5/8� - 18 UNF

Crafted from hardened alloy steel for long life, DEWALT Long Power Ship Auger Bits feature a dual-cutting edge for maximum durability in nails. A self-feed spur delivers expedited material penetration, and hollow center flute provides aggressive chip extraction. Heat treated and tempered for long life.

The universal drill bit Goldcraft is the perfect solution for drilling in almost all materials due to the special cutting edge geomety and the diamond-trond cutting surface of the carbide tip. The very hard tungsten-titanium carbide tip make the drill bit extremely wear resitant. For use in masonry, natural stone, artificial stone, steel, wood, plastic, glass, ceramics, tiles/roof tiles. Features and Benefits: Special cutting edge geometry. Diamond ground carbide tip. Milled flute for optimum removal of drlling dust. High-temperature brazing at about 1120°C. Special cutting helix with micro surface hardness. iso 5468.

100% High quality and Brand new. The gears is made from YG8 tungsten carbide steel and the rigidity varies from The hole saw has a twist drill bit inside, which is undetachable. 64HRC to 65HRC. Sharp gears and anti-cutting with lower consumption make the product a long service life. Carbide teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine. Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass. Can drill about 20mm depth Please noted that if you cut the hard material such as steel, ceramic tile...you need to use the oil or water to low the temperature, if not, maybe the drill bit will be broken due to high temperature, please understand Application: drill machine, do not advocate the use of drill machine. Use the matters needing attention: The knife cut materials must be fixed, not mobile, and opening into a 90 degree angle. When the positioning drill through, please wait for a moment, and then slowly drilling. In the process of operation, such as abnormal or cutting is not ideal, please stop working, to cut down on the job. Upper and lower screws do not too hard, so as not to turn the screw slide, such as the emergence of the store does not pay any responsibility. Processing thickness more than 15MM, please go to the next spring, please do not drill metal material under 1.5MM. Available in the bench drill, magnetic drill, drill, the use of pneumatic drill, drill.

Center Drill: HSS Center Drill, Carbide tipped Center Drill Applicable Electric Drill: Portable electric drills (in the rotary-only mode). Not for Impact Use, Bench Drill Machine, Radial Drill Machine, and Magnetic Drill Machine Applications: Aluminum, Copper, Brass, Mild Steel, I Beam, etc. of up to 4 mm (5/32”) thickness in combination with HSS Center Drill RP Plates, Hardened Steel, Stainless Steel, Resin Plates, etc. of up to 4 mm (5/32”) thickness in combination with Carbide Tip Center Drill

Switch from MAX to SDS PLUS

DuraMAX quality, 4/6 variable thread structure, super HSS alloy threads, spring steel body

Code J40-016 Size (mm) 16 Size (inch) 5/8 " Length (mm) 55 Explanation DuraMAX quality, 4/6 variable thread structure, super HSS alloy threads, spring steel body

Product Name : Drill Chuck Thread Mount: 3/8inch-24UNF Capacity: 1.5mm-10mm Drill Chuck Overall Size: 57 x 33mm/2.24 x 1.3inch(L*D)   Adapter Material : 40cr Shank Type : Round Shank

Item Name : Chuck Key;Maximun Diameter : 20mm Minimun Diameter : 15mm;Central axis Diameter : 8mm Number of teeth : 11;Measurement : 83 x 48mm / 3.37" x 1.89" (L*W) Material : Metal;Weight : 62g

Single row cup brush, the twisted steel bristles give a long life and guarantee a large decrease but give a rough finish.Suitable for removing strong rust, paint stripping and deslagging.

Ideal for removing paint or rust from anytype of metal surface.Corrugated brass-plated steel wire Ø 0.30 mm.

Cuts through metal Carbide-tipped teeth with extreme impact resistance 6 times longer life than standard saw blades Easy glide coating helps with less drag, gumming and corrosion Produces high quality, fast and effortless cuts due to the super thin kerf design Clean and smooth cuts thanks to the noise and vibration absorption Suits mitre saws

These brushes are made of cotton cloth Assembled on polishing lathe to finish or polish plaster moulds,acrylic.

Base material: Hard wood (beech, oak, etc.), Resin wood (spruce, pine, etc.), Wood composites Diameter: 120 mm Product class: Premium

MATERIAL: CEMENTED CARBIDE 4PCS HOLE SAWS 33,53,67,73MM 1PCS 33*8 mm REAR COVER  1PCS 10*135 mm CENTER DRILL 

MATERIAL: M3 BIMETAL 9PCS HOLE SAW 19,22,29,35,38,44,51,57,64mm 2pcs ARBO :1PCS ADAPTER  1PCS PILOT DRILL